Shielded Type

RJ45 Jack Shielded SMD Type

Part number: 210A-11A0B-RA17
RJ45 Jack Shielded Type, R/A Middle Mount Down Latch SMD G/F Reel

Current Rating	1.5 AMP
Voltage Rating	150 VAC
Contact Resistance	40 Milliohms MAX.
Insulation Resistance	500 Megohms Min. @500 VDC
Dielectric Withstanding Voltage	750 VAC 60Hz, 1Min.

Shield Material	Brass, t= 0.20mm.
Housing & Insert Material	LCP. UL94V-0, Black
Contact Material	Phosphor Bronze t=0.30mm
Operating Life	500 Cycles Min.
PCB Retention Post-solder	10 LBS MIN.

Storage	-40℃ to +85℃
Operation	-40℃ to +85℃
IR Reflow Soldering Temperature	255℃~265℃ (5~10 Sec.)

Drawing

PDF Download

RJ45 R/A Bottom Latch, DIP, w/ EMI, w/o LED

Part number: 210A-11C0A-R
RJ45 Right Angle, Bottom Latch, DIP, w/ EMI, w/o LED, 5u”

Current Rating	1.5AMP
Voltage Rating	125VAC RMS.
Contact Resistance	45 Milliohms MAX.
Insulation Resistance	1000 Megohms MIN@500 VDC
Dielectric Withstanding Voltage	1000 VDC RMS 60Hz, 1MIN

Housing Material	Glass Filled Polyester or High Temp. UL94V-0.
Contact Material	Phosphor Bronze φ0.46mm .
Plating	Gold Plating over Nickel.
Shield Plating	Nickel Plating over Brass.
Operating Life	750 Cycles Min.
PCB Retention Pre-Solder	1 LB Min.
PCB Retention Post-Solder	10 LBS Min.

Storage Temperature	-40℃ to +70℃
Operation Temperature	0℃ to +70℃
Wave Solding Temperature	225℃~265℃(5~10 Seconds)
Wave Solding Temperature	Mates with Modular Plug Conforming to FCC Part 68, Subpart F.

Drawing

PDF Download

RJ45 Vertical DIP, w/EMI, w/o LED, 5u”

Part number: 210A-11C0A-RA10
Vertical, DIP, w/EMI, w/o LED, 5u”

Current Rating	1.5AMP
Voltage Rating	125VAC
Contact Rating	30mΩ Max.
Insulation Resistance	1000MΩMin.
Dielectric Withstanding Voltage	1000VAC 60Hz 1Minute

Durability	750 Cycle

Operating TemperatureRange	-40℃ to +85℃
Storage Temperature Range	-40℃ to +85℃

Recommended Wave Soldering Temperature	260℃
Recommended PCB Thickness	1.6mm
PCB Retention Pre-solder	1LB Min.
PCB Retention Post-solder	10LB Min.

Drawing

PDF Download

RJ45 R/A Bottom Latch, DIP , w/o EMI / LED

Part number: 210A-11C0B-R
Right Angle, Bottom Latch, DIP, w/o EMI / LED, 5u”

Current Rating	1.5AMP
Voltage Rating	125VAC RMS.
Contact Resistance	45 Milliohms MAX.
Insulation Resistance	1000 Megohms MIN@500 VDC
Dielectric Withstanding Voltage	1000 VDC RMS 60Hz, 1MIN

Housing Material	Glass Filled Polyester or High Temp. UL94V-0.
Contact Material	Phosphor Bronze φ0.46mm .
Plating	Gold Plating over Nickel.
Shield Plating	Nickel Plating over Brass.
Operating Life	750 Cycles Min.
PCB Retention Pre-Solder	1 LB Min.
PCB Retention Post-Solder	10 LBS Min.

Storage Temperature	-40℃ to +70℃
Operation Temperature	0℃ to +70℃
Wave Solding Temperature	225℃~265℃(5~10 Seconds)
Wave Solding Temperature	Mates with Modular Plug Conforming to FCC Part 68, Subpart F.

Drawing

PDF Download

RJ45 1×4 R/A, Bottom Latch, DIP, w/o EMI / LED

Part number: 210A-14C0B-R
1×4, Right Angle, Bottom Latch, DIP, w/o EMI / LED, 5u”

Current Rating	1.5AMP.
Voltage Rating	125 VAC RMS
Contact Resistance	35Milliohms Max.
Insulation Resistance	1000 Megohms Min. @ 500 VDC
DielectricStrength	1000 VAC RMS 60Hz 1Minute

Housing Material	High Temp. UL94V-0, Black
Contact Material	Phosphor Bronze t: 0.35mm.
Plating	Gold Plating Over Nickel
Operating Life	750 Cycles Min.
PCB Retention Pre-solder	1 LB Min.
PCB Retention Post-solder	10 LBS Min.

Operating TemperatureRange	-0℃~+70℃
Storage Temperature Range	-40℃~+85℃
Storage Temperature Range	Mate with Modular Plug Conforming to FCC PART 68, SUBPART F

Recommended Wave Soldering Temperature	260℃
Recommended PCB Thickness	1.6mm
PCB Retention Pre-solder	1LB Min.
PCB Retention Post-solder	10LB Min.

Drawing

PDF Download

RJ45 R/A Upper Latch, DIP, w/EMI / LED

Part number: 211A-1XCAA-R01
RJ45 Right Angle, Upper Latch, DIP, w/EMI / LED, 5u”

Current Rating	1.5AMP
Voltage Rating	125 VAC RMS
Contact Resistance	30 Milliohms Max.
Insulation Resistance	1000 Megohms Min. @ 500 VDC
DielectricStrength	1000 VAC RMS 60Hz 1Minute
LED Rating	Forward Voltage: 2.2 Volts Typical.
Reverse Voltage	5 Volts Maximum.
Operating	750 Cycles Min.

Housing Material	Glass Filled Polyester or High Temp. UL94V-0
Insert Material	Glass Filled Polyester UL94V-0
Back Plate Material	Glass Filled Polyester UL94V-0.
LED Size	73.051.85, P=2.54mm.
Shield Material	Copper Alloy 0.25mm Thickness Nickel Plating.
Contact Material	Phosphor Bronze 0.35mm Thickness.
Plating	Gold Plating over Nickel.
PCB Retention Pre-Solder	1 LB Min.
PCB Retention Post-Solder	10 LBS Min.

Operating TemperatureRange	0℃ to +70℃
Storage Temperature Range	-40℃ to +85℃
Storage Temperature Range	Wave Soldering Temperature:255~265℃ (5~10 Seconds)
Storage Temperature Range	Mates with Modular Plug Conforming to FCC Part 68, Subpart F.

Drawing

PDF Download

RJ45 1×2 R/A, Upper Latch, DIP, w/EMI / LED

Part number: 211C-12CAA
1×2, Right Angle, Upper Latch, DIP, w/EMI / LED, 5u”

Current Rating	1.5A
Voltage Rating	125VAC
Contact Resistance	30mΩ
Insulation Resistance	1000MΩ Min. at 500 VDC
Dielectric Withstanding Voltage	1000VAC 60Hz 1 minute
LED Ratings	2.2V Typical.
Reverse Voltage	5V max.

Durability	750 Cycle
PCB Retention Pre-Solder	1 LB min.
PCB Retention Post-Solder	10 LBS min.

Operating temperature range	-40°C~+85°C
Storage temperature range	-40°C~+85°C

Wave Soldering Temp	255°C to 260°C/ 5 to 10 sec.

Drawing

PDF Download

RJ45 1×4 R/A, Upper Latch, DIP, w/EMI / LED

Part number: 211C-14CAA
1×4, Right Angle, Upper Latch, DIP, w/EMI / LED, 5u”

Current Rating	1.5A
Voltage Rating	125VAC
Contact Resistance	30mΩ
Insulation Resistance	1000MΩ Min. at 500 VDC
Dielectric Withstanding Voltage	1000VAC 60Hz 1 minute
LED Ratings	Forward Voltage: 2.2V Typical.
Reverse Voltage	5V max.

Durability	750 Cycle
PCB Retention Pre-Solder	1 LB min.
PCB Retention Post-Solder	10 LBS min.

Operating temperature range	-40°C~+85°C
Storage temperature range	-40°C~+85°C

Wave Soldering Temp	255°C to 260°C/ 5 to 10 sec.

Drawing

PDF Download