Quote / Datasheet

Magnetic Type

RJ45 R/A Bottom Latch, DIP, w/EMI, w/o LED

Connector Solution 212A-11CA0-R

Part number: 212A-11CA0-R
Right Angle, Bottom Latch, DIP, w/EMI, w/o LED, 5u”

Insertion Loss0.3-100MHz -1.0 dB Max.
Return Loss1-30MHz -20dB Min. Load 100 Ohms
Return Loss30-60MHz -15dB Min. Load 100 Ohms
Return Loss60-80MHz -10dB Min. Load 100 Ohms
Cross Talk1 – 100MHz -30dB Min.
Common to Common Mode Rejection1-100MHz -30dB Min.
Turn RatiosRX=1:1(+/-3%) TX=1:1(+/-3%)
Isolation 60HzInput to Output 1500Vrms, 60 Seconds
Primary Inductance@100KHz 0.1Vrms.8mA DC Bias 350uH Min.
Rise Time (10-90%)2.5ns Typical
Housing MaterialHigh Temp. UL94V-0.
Contact MaterialPhosphor Bronze t=0.35mm
PlatingGold Plating over Nickel.
Operating Life750 Cycles Min.
PCB Retention Pre-Solder1 LB Min.
PCB Retention Post-Solder10 LBS Min.
Storage Temperature-40°C to +85°C.
Operation Temperature0℃ to +70℃
Wave Soldering Temperature255℃~265℃(3~5 Seconds)
Wave Soldering TemperatureMates with Modular Plug Conforming to FCC Part 68, Subpart F.

Drawing

PDF Download

RJ45 R/A Middle Mount, Upper Latch, DIP, w/EMI, w/o LED

Connector Solution 212A-11CD0-RA8

Part number: 212A-11CD0-RA8
Right Angle, Middle Mount, Upper Latch, DIP, w/EMI, w/o LED, 5u”

Current Rating350mA per pin
Voltage Rating570V DC per pin
Contact Resistance20mΩ Max.
Insulation Resistance1000MΩ Min.
Dielectric Withstanding Voltage1500VAC/2250VDC
Durability1,000 Cycle
Insertion Force35.6N max.
Extraction Force35.6N max.
Operating temperature range-0℃~+70℃
Storage temperature range-40℃~+85℃
Recommended IR Reflow Temperature260℃
Recommended PCB Thickness1.5mm

Drawing

PDF Download

RJ45 1X4 R/A, Bottom Latch, DIP, w/EMI, w/o LED

Connector Solution 212A-14CA0-RA11

Part number: 212A-14CA0-RA11
RJ45 1X4, Right Angle, Bottom Latch, DIP, w/EMI, w/o LED, 5u”

Current Rating1.5A per pin
Voltage Rating125V DC per pin
Contact Resistance50mΩ
Insulation Resistance1000MΩ
Dielectric Withstanding Voltage1000VAC
Durability750 Cycle
Operating temperature range-40℃~+85℃
Storage temperature range-40℃~+85℃
Recommended IR Reflow Temperature260℃
Recommended PCB Thickness1.6mm

Drawing

PDF Download

RJ45 1X4 R/A, Upper Latch, DIP, w/EMI, w/o LED

Connector Solution 212B-14CA0

Part number: 212B-14CA0
RJ45 1X4 R/A, Upper Latch, DIP, w/EMI, w/o LED, 5u”

Inductance at 100KHz, 100mV 8mADC Bias350uH Min.
Leakage Inductance0.4uH Max. at 100KHz 100mV
Insertion Loss1.1dB Max. at 1 to 100MHz
Return Loss18dB Min. at 1 to 30MHz
Return Loss16dB Min. at 30 to 60MHz
Return Loss12dB Min. at 60 to 80MHz
Cross Talk1 to 100MHz 30dB Min.
Common Mode Rejection30dB Min. at 1 to 100MHz
Isolation Voltage at 60Hz1500Vrms (Input to Output) 60 Seconds
Operating Life750 Cycles Min.
Storage-40°C to +85°C.
Operation-40°C to +85°C.
Soldering Temperature260±5°C, 10 Seconds
Soldering TemperatureMates With Modular Plug Conforming To TIA-1096-A

Drawing

PDF Download

RJ45 R/A Bottom Latch, DIP, w/EMI / LED

Connector Solution 213A-11CAA-R

Part number: 213A-11CAA-R
Right Angle, Bottom Latch, DIP, w/EMI / LED

Insertion Loss1-100MHz -1.0 dB Max.
Insertion Loss1-30MHz -18dB Min. Load 100 Ohms
Return Loss30-80MHz -12dB Min. Load 100 Ohms
Cross Talk30MHz – 40dB Typ.
Cross Talk60MHz – 35dB Typ.
Cross Talk100MHz – 30dB Typ.
CMRR1-50MHz – 30dB Typ.
CMRR50-130MHz -20dB Typ.
Turn RatiosRX=1:1(+/-3%) TX=1:1(+/-3%)
Isolation 60HzInput to Output 1500Vrms, 60 Seconds
Primary Inductance@100KHz 0.1Vrms.8mA DC Bias 350uH Min.
Housing MaterialHigh Temp. UL94V-0.
Contact MaterialPhosphor Bronze t=0.35mm
PlatingGold Plating over Nickel.
Operating Life750 Cycles Min.
PCB Retention Pre-Solder1 LB Min.
PCB Retention Post-Solder10 LBS Min.
Storage Temperature-40℃~+85℃
Operation Temperature0℃ to +70℃
Wave Soldering Temperature230℃~250℃(3~5 Seconds)
Wave Soldering TemperatureMates with Modular Plug Conforming to FCC Part 68, Subpart F.

Drawing

PDF Download

RJ45 R/A Upper Latch, DIP, w/EMI / LED

Connector Solution 213A-11CAA-RA13

Part number: 213A-11CAA-RA13
Right Angle, Upper Latch, DIP, w/EMI / LED

Current Rating1.5A per pin
Voltage Rating125V DC per pin
Contact Resistance50mΩ
Insulation Resistance1000MΩ
Dielectric Withstanding Voltage1000VAC
Terminal Durability750 Cycle
Operating temperature range-40℃~+85℃
Storage temperature range-40℃~+85℃
Recommended Wave Soldering Temperature260℃
Recommended PCB Thickness1.6mm

Drawing

PDF Download

RJ45 1X2 R/A Bottom Latch, DIP, w/EMI / LED

Connector Solution 213A-12CAA-RA12

Part number: 213A-12CAA-RA12
1X2, Right Angle, Bottom Latch, DIP, w/EMI / LED, 5u”

Current Rating1.5A per pin
Voltage Rating125V DC per pin
Contact Resistance50mΩ
Insulation Resistance1000MΩ
Dielectric Withstanding Voltage1000VAC
Terminal Durability750 Cycle
Operating temperature range-40℃~+85℃
Storage temperature range-40℃~+85℃
Recommended Wave Soldering Temperature260℃
Recommended PCB Thickness1.6mm

Drawing

PDF Download

RJ45 1X4 R/A Upper Latch, DIP, w/EMI / LED

Connector Solution 213A-14CAA-RA14

Part number: 213A-14CAA-RA14
1X4, Right Angle, Upper Latch, DIP, w/EMI / LED, 5u”

Current Rating1.5A per pin
Voltage Rating125V DC per pin
Contact Resistance50mΩ
Insulation Resistance1000MΩ
Dielectric Withstanding Voltage1000VAC
Terminal Durability750 Cycle
Operating temperature range-40℃~+85℃
Storage temperature range-40℃~+85℃
Recommended Wave Soldering Temperature260℃
Recommended PCB Thickness1.6mm

Drawing

PDF Download

RJ45 Vertical DIP Type, w/o EMI, w/ LED

Connector Solution 213B-11CBA

Part number: 213B-11CBA
RJ45 Vertical DIP Type, w/o EMI, w/ LED, 5u”

Inductance at 100KHz, 100mV 8mADC Bias350uH Min.
Leakage Inductance0.4uH Max. at 100KHz 100mV
Insertion Loss1.1dB Max. at 1 to 100MHz
Return Loss18dB Min. at 1 to 30MHz
Return Loss16dB Min. at 30 to 60MHz
Return Loss12dB Min. at 60 to 80MHz
Cross Talk1 to 100MHz 30dB Min.
Common Mode Rejection30dB Min. at 1 to 100MHz
Isolation Voltage at 60Hz1500Vrms (Input to Output) 60 Seconds
Operating Life750 Cycles Min.
Storage-40°C to +85°C.
Operation-40°C to +85°C.
Soldering Temperature260±5°C, 10 Seconds
Soldering TemperatureMates With Modular Plug Conforming To TIA-1096-A

Drawing

PDF Download

RJ45 1X4 R/A, Bottom Latch, DIP, w/EMI / LED

Connector Solution 213B-14CAA

Part number: 213B-14CAA
1X4, Right Angle, Bottom Latch, DIP, w/EMI / LED, 5u”

Inductance at 100KHz, 100mV 8mADC Bias350uH Min.
Leakage Inductance0.4uH Max. at 100KHz 100mV
Insertion Loss1.1dB Max. at 1 to 100MHz
Return Loss18dB Min. at 1 to 30MHz
Return Loss16dB Min. at 30 to 60MHz
Return Loss12dB Min. at 60 to 80MHz
Cross Talk1 to 100MHz 30dB Min.
Common Mode Rejection30dB Min. at 1 to 100MHz
Isolation Voltage at 60Hz1500Vrms (Input to Output) 60 Seconds
Operating Life750 Cycles Min.
Storage-40°C to +85°C.
Operation-40°C to +85°C.
Soldering Temperature260±5°C, 10 Seconds
Soldering TemperatureMates With Modular Plug Conforming To TIA-1096-A

Drawing

PDF Download

RJ45 1X4 R/A, Upper Latch, DIP, w/EMI / LED

Connector Solution 213B-14CAB-01

Part number: 213B-14CAB-01
1X4, Right Angle, Upper Latch, DIP, w/EMI / LED, 5u”

TR: (100KHz, 0.1V)PINS:(2,3):(J1,J2)=1CT:1CT±3%;(4,5):(J3,J6)=1:1±3%
TR: (100KHz, 0.1V)PINS:(6,7):(J4,J5)=1CT:1CT±3%;(8,9):(J7,J8)=1:1±3%
LX: (100KHz, 100mV, 8mA, DC Bias)PINS: (J1,J2),(J3,J6),(J4,J5),(J7,J8)=350uH MINIMUM
DCR: PINS(2,3),(4,5),(6,7),(8,9)=1.5 OHMS MAXIMUM. PINS: (J1,J2),(J3,J6),(J4,J5),(J7,J8)=1.5 OHMS MAXIMUM.
HIPOTPINS(2,3)TO(J1,J2):(4,5)TO(J3,J6)=1500VAC FOR 2 SECONDS
HIPOTPINS(6,7)TO(J4,J5);(8,9)TO(J7,J8)=1500VAC FOR 2 SECONDS
INSERTION LOSS-0.5dB MAXIMUM AT 1MHz TO 65MHz -0.8dB MAXIMUM AT 65MHz TO 100MHz -1.2dB MAXIMUM AT 100MHz TO 125MHz
RETURN LOSS-16dB MINIMUM AT 1MHz TO 30MHz -13.5dB MINIMUM AT 30MHz TO 40MHz -11.5dB MINIMUM AT 40MHz TO 50MHz -10dB MINIMUM AT 50MHz TO 80MHz
CROSS TALK30dB MINIMUM AT 1MHz TO 100MHz
COMMON TO DIFFERENTIAL MODE REJECTION30dB MINIMUM AT 1MHz TO 100MHz

Drawing

PDF Download