Vehicle Grade Anti-Surge Wire Wound MELF Resistors – SWM
Part number: SWM
(Anti-Surge Wirewound MELF Resistor)
- Power Rating: 1W ~4W
- Ohm Range: 1R ~ 1K2
- Tolerance: ±5%
Resistor Key Features:
- AEC-Q200 compliant
- SMD enabled structure
- Flameproof multi-layer coating equivalent to UL 94 V-0
- Flameproof feature equivalent to overload test UL 1412
- SWM series can be adopted for high surge applications such as high rush current protection for power capacitor, motor start-up protection, car & motorcycle engine ignition, etc.
- Enhanced weld spot is reliable against surge impact
- Typical 1.2/50us pulse load: 8000W ~ 32000W
Vehicle Grade Metal Film MELF Precision Resistor – MMP(V)
Part number: MMP(V)
(Metal Film MELF Precision Resistor, Vehicle Grade)
- Power Rating: 0.25W ~ 0.5W
- Ohm Range: 10R ~ 1M
- Tolerance: ±0.1%, ±0.25%, ±0.5%
Resistor Key Features:
- AEC-Q200 Compliant
- Excellent solderability termination
- Typical 1.2/50μs pulse load: 35W ~ 80W
- Typical temperature coefficient: ±25ppm ~ ±100ppm
- Excellent in heat dissipation than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
Vehicle Grade Metal Film MELF Resistor – MM(V)
Part number: MM(V)
(Metal Film MELF Resistor, Vehicle Grade)
- Power Rating: 0.25W ~ 0.5W
- Ohm Range: 0R47 ~ 10M
- Tolerance: ±1%, ±2%, ±5%
Resistor Key Features:
- AEC-Q200 compliant
- Excellent solderability termination
- Typical 10μs maximum pulse load: 35W ~ 80W
- Typical temperature coef cient: ±25ppm ~ ±100ppm
- Excellent in heat dissipation than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
Vehicle Grade Metal Film MELF Resistor – MM102
Part number: MM102
(Metal Film MELF Resistor)
- Power Rating: 0.2W
- Ohm Range: 0R, 0.22R ~ 2.2M
- Tolerance: ±0.5% ~ ±5%
Resistor Key Features:
- AEC-Q200 compliant
- SMD-enabled structure
- Excellent solderability termination
- Typical temperature coefficient: 25ppm – 100ppm
- Excellent in heat dissipation than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
Vehicle Grade Stabilized Film Power MELF Resistor – SFP(V)
Part number: SFP(V)
(Stabilized Film Power MELF Resistor, Vehicle Grade)
- Power Rating: 0.4W ~ 3W
- Ohm Range: 0R22 ~ 1M
- Tolerance: ±1% ~ ±5%
Resistor Key Features:
- AEC-Q200 Complicant
- Low temperature coefficient and terance
- Superior power handing
- Typical temperature coefficient: ±25ppm ~ ±50ppm
- Excellent in heat dissipation than chip resistor
- Stronger mechanical structure to endure vibration and thermal shock
Vehicle Grade Surge Resistant MELF Resistor – SRM
Part number: SRM
(Surge Resistant MELF Resistor)
- Power Rating: 0.25W ~ 3W
- Ohm Range: 0R1 ~ 10M
- Tolerance: ±1% ~ ±5%
Resistor Key Features:
- AEC-Q200 compliant
- Miniaturized MELF design handles high power
- Special conductive film enhances anti-surge capability
- Absorbs harmful surge which damages precious devices or components
- SMD-enabled alternative to carbon composition resistors
- Maximum permissible surge voltage: 2KV ~ 10KV
- Approved to the safety requirement of EN IEC 62368-1:2018, Anhang / Annex G.10
Zoicomp AB 